Gal Pipe Clamps are Q235 steel cable clamps used to hold cable runs on poles, walls, brackets, bridge areas, and equipment rooms. The clamp keeps the cable in a fixed position, so the line does not sag, rub against nearby metal, or move after installation. It is a simple fitting, but the cable outside diameter, clamp size, and fixing holes still need to match the real route before ordering.
Product Advantages
Q235 steel body gives enough stiffness for common cable fixing points on poles, walls, and bracket frames.
Hot dip galvanizing is suitable for outdoor and semi-outdoor cable routes where rain and dust are common.
Size ranges such as 60×190–60×270 mm and 80×190–80×230 mm can cover many regular cable holding positions; other sizes can be checked by drawing.
Main Applications
Cable fixing in power line projects, road service areas, and bridge electrical work.
Tunnel and railway cable runs where the cable needs a steady holding point.
Equipment rooms and machine rooms with many cables placed close to each other.
Gal Pipe Clamps can also be used on simple support frames when the cable route is measured first.
FAQ
Q: How should the size be picked?
A: Measure the cable outside diameter, the fixing position, and the hole distance first. Then choose the nearest clamp size with enough room for installation.
Q: Can the clamp be customized?
A: Yes. Size, hole position, and surface treatment can be made according to drawing or sample details.
Q: What should be checked before installation?
A: Check cable diameter, clamp opening, bolt position, zinc surface, and the support frame. gal pipe clamps should not be tightened until the cable route is confirmed.
Hot Tags: gal pipe clamps, China gal pipe clamps manufacturers, suppliers, factory, 1 4 steel cable clamps, 3mm wire rope clamp, electric pole cross arm, guy wire anchors screw, hot dip galvanized guy angle thimble eyelet, Suspension Clamp XGF
